Bear Renfrew T-shirt

P1140473

It’s the bear-bear Renfrew! My cosy new t-shirt with bears on!

This was so much fun to make! Especially after making my fern print Mimi which took forever and involved fabric that didn’t behave. This t-shirt was planned as my first foray into working with knits, but completely by accident (because I wasn’t pay attention), the fern Mimi took that crown. This t-shirt was an absolute breeze compared to that. The fabric is a fairly thick jersey – almost maybe sweatshirt material – and it did exactly what I told it to. Heavenly! And it took hardly any time at all to make, which I really appreciated as I had to go to work on the weekend I made it so I didn’t have many spare hours.

Apology up front: the pictures in this post have come out a bit desaturated, oops! It was a really bright day when I took these photos so the colour got a bit washed out and I’ve struggled to put it back in. The pic at the top is the truest to the colour – it’s a nice vivid blue with a hint of grey. We can pretend that the rest of the pictures are using a cool Instagram filter.

P1140480.jpg

The pattern is the Sewaholic Renfrew. I bought the paper pattern. I’ve decided I’m never going to buy a PDF pattern again (unless it’s the only option) because 1) it’s so nice to have the real, physical product and 2) I’d honestly rather wait a few weeks for a pattern to reach me than lose a precious evening to sellotape. Time is money, friend! (Goblin salesmen from WoW yeah? Anyone? Just me?)

There were a few steps in the construction that I was worried about  – the neck, arm and waist bands which are a bit shorter than the opening you sew them to, and the sleeves which are sewn flat – but it all went surprisingly smoothly. The trick to the bands is to put a pin in every quarter of the way around, matching seams – then with the band on top, gently stretch it to the right size as it goes through the machine. On my very first go I went pin-mad but it just got really fiddly. It was much easier with fewer pins.

P1140476.jpg

There are little bears mountain climbing all over me!

P1140472

I picked the size 4 and it fits nicely with absolutely no adjustments. Is that how knits work? Is it always this magical?! I bet I just got lucky this time.

The fit is just right across the bust and has enough ease around the waist for a proper big dinner. For future Renfrews I may go for a size 2 at the waist for a snugger fit, but for this particular tee I think the looseness adds a casual vibe that goes well with the casual fabric.

P1140454

So comfy and cosy. I want to make twenty more like it!

Advertisements

Slinky Knits are Hard: The Fern Mimi

I know, know – I said a couple of posts ago that my Tilly spree was over as I had ordered some new patterns. But I’d forgotten for how long it takes for post to get to me here in Singapore. And while I was waiting I wasn’t very well going to sew nothing, was I?

P1140382

After my first Mimi blouse came out stiffer than I’d hoped, I wanted to try it out in a fabric with good drape. So I picked up this cute rayon with a monochrome fern print. I love wearing rayon – it performs well in a humid climate like Singapore because it is breathable, and yet doesn’t crease with wear like other breathable fabrics such as linen or cotton. From a wardrobe perspective, rayon’s a real winner.

Well. This particular rayon was a real challenge! I’d heard people complaining before about how their fabric “shifts” and “moves” when they work with it, but I had no idea what that meant. And now I do. Holy moly this fabric has a life of its own! It’s slinky, it’s lightweight, and oh, it also turns out to be a knit rather than a woven. Just stand in the same room as it and that will be enough for it to stretch, forming waves that distort the grain, taunting you. But I bravely (recklessly) decided to plough on. Why did I do this to myself?
P1140353

Cutting it was a serious task. Even folding the fabric to pin the selvedges together before cutting it was a serious task. I decided to use my new rotary cutter as I’d read that scissors distort slinky fabrics like this as you cut them. Well, turns out rotary cutters do too. This was the least precise cutting I have done by a long way. Eventually I gave up on all hopes of the fabric laying straight as I cut it and just resorted to hope and crossed fingers. (Figuratively crossed fingers, of course. Crossing them while holding a rotary cutter would be a trip to A&E waiting to happen.)

Sewing took ages. This fabric enjoys being near the sewing needle, so totally unrelated bits of blouse kept getting caught up in my seams. I am a real pro with the seam ripper now.
P1140428
But somehow, against all odds, it worked out really well in the end. It’s so comfy to wear! For all that the slinky rayon kept slinking right off the table while I was working with it, it’s delightful against the skin, and has exactly the drape that this pattern deserves. And I think it looks great!
P1140410
I used Tilly’s pussy bow Mimi hack to transform the collar. There’s a bit where she asks you to sew and trim seam allowances up until the notch. Then the remaining seam allowances get sewn to the neckline of the blouse. I didn’t manage this quite right as there’s a couple of millimetres of the unfinished seam allowance exposed right at the corner which I’ll probably blanket stitch. If you try this hack, make sure to pay close attention to that corner.
P1140408
I used these cute little hexagonal buttons. Because I had trouble with the top closure not lying flat in my last Mimi and ended up adding a hidden hook and eye, I put two buttons up there this time – but that didn’t do the trick either. I just can’t get that top corner to lie flat. Luckily, this time the top corner is completely hidden by the bow so it doesn’t really matter.
P1140415
Here’s a view from the back – I think the gathers work really well in this fabric.
P1140443
You can see from the side that even though it’s got quite a bit of ease, it drapes in a lovely way. Ha, I just noticed while writing this that you can also see how completely off grain my cutting is too, given how the print is angled completely differently on the front and back pieces. Oh well!
I did not expect I’d be saying this, but the finished piece is certainly worth all the frustration I had working with the fabric. Once I’ve worked through the fabrics I bought in my last haul (yes, I’m still that naive that I think I’m going to empty my fabric stash) I’ll try to make another pattern in a slinky rayon like this. The comfort and breeziness of this blouse are through the roof, and I want to wear it every day, so it’ll be great to nail the slinky fabric skill and fill my wardrobe with me-made rayon tops.

Anchor Mimi Blouse

Look, it’s my first blouse! I made the Mimi blouse from Love at First Stitch.
anchor-mimi-tucked.jpg
I made no alterations to this one as I made it immediately after making my alteration-ridden Megan dress (the one with the six bodice muslins) and I just wanted to get my teeth stuck straight into the sewing. I think the finished piece fits me alright – but then it’s a loose fitting garment with no darts or anything, so there wasn’t much risk there.
anchor-mimi-buttons-2
I bought the fabric at the People’s Park Food Centre in Chinatown, which is amazing by the way. Fabric stores as far as the eye can see – and cheap too!
This is a cotton, but beyond that I couldn’t tell you much about it. I thought it was a lawn when I bought it, but it isn’t especially drapey, so I suspect it’s more of a poplin. Anyone got any tips on how to identify different types of cotton?
Unfortunately the pattern calls for drapiness, so the finished blouse is a bit stiffer than I would like. It’s wearable, but I’m not really all that sure about the way it hangs at the back when it’s tucked in:
anchor-mimi-tucked-side.jpg
anchor-mimi-tucked-back.jpg
That’s not as much of a problem when its untucked -but that’s not really my style. I tend towards an hourglass silhouette, so I’d typically tuck in a loose fitting blouse at the waist. We’ll have to see how often I reach for this one in my wardrobe.
anchor-mimi-untucked-front-2.jpg
anchor-mimi-untucked-back.jpg
I did have a couple of other issues making it. I must have sewn the yoke interfacing on a little wonky, because the corner above the top button really wants to stick out, and no amount of pressing will subdue it. I had a go at restitching it without much success, so in the end I whacked a hidden hook-and-eye in there. Bit of a duct tape solution, but it did the trick…
anchor-mimi-hook-eye
The other issue was really just foolishness on my part. Put the buttons on the wrong side, didn’t I? Totally didn’t think that through. At least I know I’ll never make that mistake again. It feels very weird buttoning up a blouse this way round!
anchor-mimi-buttons-1
All in all, a successful make, but I’m not sure how much I will end up wearing it. I’ve just picked up some drapey rayon to make up another version and see if I can make this pattern work for me.
anchor-mimi-sleeve-detail